Use a spare phone as a camera you control
A spare phone, tablet or laptop can be a camera that you watch and control from your phone: for a room, a door, a workshop, a garage, a 3D printer or a holiday home. It also listens for loud sounds, notices when it is moved or covered, watches its own battery and tells you. Here is how to set one up with MeiMei, what the people there will see, and where it falls short.
What you need
- A spare phone, tablet or laptop with a camera and a microphone. It becomes the camera.
- A charger for it: the screen stays on while the camera works.
- A network for the camera.
- Your own phone, to watch and control the camera.
It is the same web app, account and plans as MeiMei. The camera is one way to use a spare device.
Set it up
On the spare device, open meimeimonitor.com/app/ in the browser and choose “Leave this device to watch”.
Choose “A room or place”, then tap “Start with the recommended settings”. The device asks you to allow the camera and the microphone.
A code appears on its screen. Scan it with your own phone.
Point the camera at what you want to see, and check the picture on your phone.
The camera’s own page on this website has a button that opens the same thing directly, with the camera already chosen: open that page on the spare device that will be the camera, not on your own phone. You can change any of the recommended settings later. If you would rather decide every choice first, tap “Set it up myself” instead.
Keep the screen on and MeiMei in front
The camera works only while its screen is on and MeiMei is in front:
- With the screen off, or with MeiMei not in front, the camera sees and hears nothing, and it cannot be started from your phone.
- On a computer, keep the window open and in front: in another tab or minimised, the camera sees and hears nothing.
- On a computer, keep the display on and do not lock it: a browser cannot always tell, and the camera may still see and hear.
- A camera in a browser works only while its page stays open.
- A camera in a browser can make its sound only after somebody has tapped its page. Until then it cannot be started from your phone, its chime does not play, and its screen asks for that tap.
When the screen was off or MeiMei was not in front for a while, the list of alerts on your phone says that the camera could not see, and for how long. No picture or sound was sent, checked or saved in that time.
What you can do from your phone
Open the camera on your phone to see and hear what it sees and hears, live. The controls sit on the picture:
- Watch and listen live, full screen or in a small window.
- Switch between the front, the back and an outside camera.
- Zoom in and turn the picture, on your phone.
- Take a picture of what you see and save or share it.
- Turn on a light, which goes off by itself after two minutes.
- Talk through the camera’s speaker.
When the camera is waiting, you can start it at the device or from your phone.
What it tells you
The camera listens and watches on the device itself, and tells your phone about these:
- A loud sound, such as a bang or a slam.
- Something that sounds like glass breaking.
- A smoke or fire alarm.
- Movement in the picture.
- The camera being moved, picked up or covered.
- A picture that is too dark, with a light to turn on.
You choose which alerts tell you. A higher sensitivity notices more, and gives more false alerts. What the camera hears goes to a phone of your home only while somebody there listens live, and its screen shows that someone is listening. Nothing else it hears is kept or sent, except as alerts and clips.
How it watches itself
A status list on your phone shows the device behind the camera, and it tells you when something needs a look:
- Battery and charger, and when the charger is unplugged.
- Heat, free storage, the network and the connection to your phone.
- The screen lock, the microphone, the camera and the motion sensors.
- When the camera cannot see because its screen is off.
Everyone there can tell
The people at the camera can always tell that it is on:
- Its screen stays lit and says that the camera is on.
- It shows when someone is watching, listening or talking.
- It plays a short chime when it starts, and when it carries on after its screen was off for more than ten seconds.
- It plays the chime when someone starts watching or listening, at most once a minute for each phone. This chime can be switched off only on the camera itself.
- Anyone at the camera can stop it with one button. It then stays stopped until somebody at the camera starts it again.
No setting turns these signs off from your phone.
Where not to point it, and who to tell
Before you start the camera:
- Tell the people who live or work there that the camera is on.
- Do not point it at a bathroom, a bedroom that is not yours, a neighbour’s home or the street.
- Recording people who do not know can be against the law where you live.
MeiMei asks you whether the people there have been told. Until you have answered, it says that this is not confirmed.
What is free, and what needs a plan
Watching on the same network, talk, and every alert are free, with one camera. These need a plan:
- Watching from outside the camera’s network, for a holiday home for example, needs MeiMei Away.
- Clips and past days need MeiMei Home or MeiMei Away.
- Phone-call alerts for urgent alerts need MeiMei Away.
With a plan that includes clips, a short clip with picture and sound is saved on the camera device when there is an alert, and you open it from the list of alerts. Without a plan nothing is saved. A smoke alarm is not clipped: open the live picture instead.
The limits
A camera sees only what light reaches, and a phone has no infrared:
- It needs light to see.
- The screen must stay on and MeiMei must stay in front.
- A camera in a browser needs its page open.
- Alerts can be wrong or late.
- Only the phones you set up are told. Nobody else is told when something happens.
A device that runs out of battery, loses its network or has its screen turned off cannot see or tell you.
More guides
Old phone as a pet monitor
What you need, the one-minute setup, where to put the device, what it tells you and what it cannot do.
Laptop as a private monitor
Camera and microphone, lid open and plugged in, pairing by link or QR code, and what the browser cannot do.
Keeping your monitor private
What stays in your home, what leaves it, how pairing is encrypted and how to delete your data.
Keep reading
Try it now, in your browser
Free, no account. Installing is optional. Any two devices on the same Wi-Fi are enough.