Turn an old phone into a pet monitor

A phone, tablet or laptop you no longer use can stay at home and watch your pet. Your own phone shows what it sees and tells you when barking, howling, whining or meowing goes on. Here is how to set one up with MeiMei, and where it falls short.

What you need

You do not have to buy anything. Gather these:

  • A spare phone, tablet or laptop with a working camera and microphone. It stays at home and watches.
  • Your own phone. It shows the live picture and receives the alerts.
  • A charger and its cable for the spare device.
  • Your home Wi-Fi.
  • A place for the spare device that your pet cannot reach.

Alerts, the live picture and sound at home, talking to your pet and the built-in calming sounds are free, with one monitor unit for the home.

Set it up in about a minute

  1. On the spare device, open meimeimonitor.com/app/ in the browser and choose “Leave this device to watch”.

  2. Choose “A pet”, then tap “Start with the recommended settings”. The device asks you to allow the camera and the microphone.

  3. A code appears on its screen. Scan it with your own phone.

  4. Tap Start watching when you leave, and Stop when you are back. Or leave it running.

The pet monitor’s own page on this website has a button that opens the same thing directly, with the pet monitor already chosen: open that page on the spare device, not on your own phone. You can change any of the recommended settings later. If you would rather decide every choice first, tap “Set it up myself” instead.

Where to put the device

Choose the place before you leave your pet alone with the device:

  • Put the device where your pet cannot reach it, chew it or knock it down.
  • Keep the charging cable out of reach too, all of it.
  • A device that charges all day gets warm: keep it out of the sun, off beds, sofas and blankets, with air around it.
  • Point the camera at the place where your pet spends the day. A pet that is out of the picture is not seen.

MeiMei asks you whether the device is out of your pet’s reach. Until you have answered, it says that this is not confirmed yet.

What it tells you

The spare device listens, looks and sends you what matters:

  • Barking, howling or whining that goes on for a minute.
  • Meowing that goes on for a minute.
  • A smoke alarm.
  • A sound like something breaking.
  • The device being moved or covered.
  • A low battery on the device.

An alert for barking, howling, whining or meowing says how long it went on. You choose the animal (a dog, a cat, or both or another animal) and which sounds MeiMei tells you about. You can also change how long a sound must go on first: 30 seconds, 1 minute, 3 minutes or 5 minutes. Movement after a long still time is always listed with the day’s summary; an alert for it is yours to switch on.

Look in, talk and play a sound

Open MeiMei on your phone at any time you choose to look:

  • See the live picture and hear the sound.
  • Talk to your pet.
  • Play one of the built-in calming sounds on the device.
  • With MeiMei Home, play your own recorded voice as a sound for your pet.

A calming sound is only a sound: MeiMei cannot promise that it calms your pet. Look at the picture to see what your pet does.

When you are out

Alerts are always free. This is what reaches you, and where:

  • Without an account, alerts reach your phone only while MeiMei is open on it.
  • To get alerts when MeiMei is closed, sign in with a free account.
  • At home, the live picture and sound are free.
  • Away from your home Wi-Fi, the live picture needs MeiMei Away. Alerts arrive without it.

If someone presses Stop on the device while you are out, your phone tells you that the pet monitor was stopped at the device, and you can start it again from your phone.

The day’s summary

Under the live picture, your phone shows a summary of the day:

  • How many times your pet barked, howled, whined or meowed, and for how long in total.
  • The longest time, and when it was.
  • How many times something breaking was heard or movement was seen, and when last.
  • On a day with nothing to report, it says so.

The summary counts what was heard and seen. Without a plan nothing is saved: the summary is shown while the session runs. With MeiMei Home, the summary also shows past days, and short video clips around an alert and sound clips are kept on your own device.

Who it can see and hear

While it watches, the device’s screen is dark, and touching it does nothing. It sees and hears everyone in the room, not only your pet:

  • A visitor.
  • A sitter.
  • A neighbour, through a wall.

With a plan that includes clips, it can save short clips that hold their voices and picture. Tell the people who come into your home that the device can see, hear and save clips.

What it cannot do

Please read this before you rely on it:

  • It watches one room, with a phone microphone and camera.
  • An alert can be wrong, late, or not arrive at all.
  • A pet that is out of the picture is not seen.
  • A neighbour’s dog, a television or a doorbell can start an alert.
  • MeiMei does not know why a pet makes a sound.

MeiMei tells you what it heard and saw. What that means is for you to judge.

More guides

Spare phone as a camera

Setup, the controls on your phone, what it tells you, the signs everyone there can see, and the limits.

No app, no account

How the browser mode works, what stays private, and what a free account and a plan would add.

Keep reading

All guides

Try it now, in your browser

Free, no account. Installing is optional. Any two devices on the same Wi-Fi are enough.

Start in your browser